E-One v2
E-ONE V2
Titanium Pry Bar
The pocket pry bar that carries its own backup bit.
Small enough to forget.
Capable enough to count on.
Watch the E-ONE V2 work.
One bar. Every angle covered.
Pocket it
Clip it, key-ring it, or drop it in a pocket — it disappears until you need it.
Reach for it
Pry, drive a bit, level a shelf, file an edge, measure a gap — instantly, no tool roll required.
Trust it
Grade 5 titanium resists corrosion and everyday wear, so it keeps performing carry after carry.
Built for confident everyday prying.
9 functions on hand, zero setup time.
Feather-light Grade 5 titanium build.
Tritium-ready so you never lose it.
From the junk drawer to the backcountry.
Everyday Fixes
Outdoor Adventures
Extreme Environments
Everything you reach for, integrated.
Nine everyday jobs handled by a single titanium bar — here's each one in detail.
A spare bit you'll never leave behind.
Most pocket tools make you choose: carry extra bits loose, or leave them behind. The E-ONE V2 solves that with hidden onboard bit storage — a spare 1/4" bit sealed inside the titanium body, ready when the job calls for a different driver.
Made for jobs your knife should never touch.
The Grade 5 titanium pry end gives you a dedicated edge for opening, lifting, scraping, and separating — without risking your blade or your fingernails.
Drive bits in seconds.
Drop in any standard 1/4" hex bit and handle quick adjustments on the spot. From pocket clips to gear screws, the magnetic holder keeps your bit seated while you work.
Hang it straight, every time.
Use it for frames, shelves, camera gear, campsite setups, or quick alignment checks when a full-size level isn't around.
Touch-ups, anywhere.
Smooth a burr, touch up an edge, or clean up a rough spot without digging through a toolbox. The integrated diamond file adds real utility without adding bulk.
A scale in your pocket.
Quickly measure small items or verify dimensions with the compact built-in ruler — handy whenever you need a rough size and don't have a tape on you.
Carry it your way.
The pocket clip is removable and repositionable, so you can set it up for deep carry, swap sides, or take it off entirely for keychain duty.
Find it in the dark.
The pocket clip accepts a 1.5 × 6 mm tritium tube, so the E-ONE V2 glows on its own — always-on visibility with zero battery, plus a look that's unmistakably yours.
Tether it down.
A dedicated lanyard hole — independent of the clip — lets you add paracord, a split ring, or a fob for flexible carry and quick attachment.
The numbers behind the build.
Against an ordinary multi-tool.
Don't take our word for it.
Independent, hands-on reviews from the EDC community — see what real reviewers think before you buy.
What EDC fans are saying.
Amazing little tool. Took a while to get here but well worth it.
Smaller than I imagined it to be but perfect as a bit driver with add-ons — the reason I bought it.
A1 very nice tool, durable enough.
Well made, comes with a T6, PH1, and flathead bit. The level reads well. I did have to round the corners a little on the pocket clip and the thin end of the pry so it wouldn't tear up my pants. I wish it was about 3/4" longer and came with a PH2 bit. Overall, I'm very satisfied.
Solid EDC tool with solid build. First one I've seen with a bubble level in a tool this small. Bit storage is nice. The clip is a bit stiff to slide into a pocket, so I may just keep it in a backpack pocket.
This pry bar feels perfect in my hand.
This thing is exactly what you're looking for. Gadget nerds and collectors — this thing is awesome.
I love this thing. Love the compartment that holds a bit of your choosing — I'm carrying a T8 torx bit for my knives. Sweet having the right tool in the woods! Highly recommended. Customer service was outstanding and communication was great. Get after this!
A somewhat compact tool with good functionality.
One bar replaces a drawer of tools.
Grab the E-ONE V2 and carry nine functions in the space of one.
Set up in under a minute.
Load a bit
Drop your most-used 1/4" bit into the magnetic holder; stow a spare in the hidden compartment.
Fit your clip
Position the adjustable pocket clip to your preferred side — or remove it for keychain carry.
Add the glow
Fit a 1.5 × 6 mm tritium tube into the pocket clip (optional) for always-on, no-battery visibility.
Carry on
Pocket, clip, or lanyard it — the E-ONE V2 is ready for whatever the day brings.
Ordered a tritium variant? Inspect on arrival.
Every tritium tube we ship is inspected and sealed. If your order includes a tritium option, here's how to verify it on arrival — and our policy if something isn't right.
Find a completely dark space, such as a closet or bathroom with all lights off.
Open the package and inspect the tritium tube immediately on the delivery date.
Place the item in total darkness and let your eyes adjust for about 30 seconds.
An intact tritium tube should glow on its own and does not require any light charging.
If the tube does not glow or shows any defect, you must contact us by email no later than the end of the day following delivery. Photos of the defective tube must be provided together with the original packaging. Delivery time is determined solely by the carrier's tracking information and delivery confirmation record. Claims reported after this deadline will not be accepted.
We want you fully happy with your tritium glow, so every tube is inspected before shipping. To protect both sides, please inspect the item immediately upon opening the package on the delivery date, checked in a completely dark environment. The delivery date and time are determined by the carrier's tracking information and delivery confirmation record. If anything looks off, just email us by the end of the day following delivery and we'll help. Claims reported after this window can't be accepted.
Frequently asked questions.
What bits does it accept?
Why Grade 5 titanium?
Can I take it on a plane?
What's your return policy?
Meet your new everyday carry.
Compact, capable, and built from titanium to handle years of everyday carry.
Original: $8,000.00
-70%$8,000.00
$2,400.00
Description
E-ONE V2
Titanium Pry Bar
The pocket pry bar that carries its own backup bit.
Small enough to forget.
Capable enough to count on.
Watch the E-ONE V2 work.
One bar. Every angle covered.
Pocket it
Clip it, key-ring it, or drop it in a pocket — it disappears until you need it.
Reach for it
Pry, drive a bit, level a shelf, file an edge, measure a gap — instantly, no tool roll required.
Trust it
Grade 5 titanium resists corrosion and everyday wear, so it keeps performing carry after carry.
Built for confident everyday prying.
9 functions on hand, zero setup time.
Feather-light Grade 5 titanium build.
Tritium-ready so you never lose it.
From the junk drawer to the backcountry.
Everyday Fixes
Outdoor Adventures
Extreme Environments
Everything you reach for, integrated.
Nine everyday jobs handled by a single titanium bar — here's each one in detail.
A spare bit you'll never leave behind.
Most pocket tools make you choose: carry extra bits loose, or leave them behind. The E-ONE V2 solves that with hidden onboard bit storage — a spare 1/4" bit sealed inside the titanium body, ready when the job calls for a different driver.
Made for jobs your knife should never touch.
The Grade 5 titanium pry end gives you a dedicated edge for opening, lifting, scraping, and separating — without risking your blade or your fingernails.
Drive bits in seconds.
Drop in any standard 1/4" hex bit and handle quick adjustments on the spot. From pocket clips to gear screws, the magnetic holder keeps your bit seated while you work.
Hang it straight, every time.
Use it for frames, shelves, camera gear, campsite setups, or quick alignment checks when a full-size level isn't around.
Touch-ups, anywhere.
Smooth a burr, touch up an edge, or clean up a rough spot without digging through a toolbox. The integrated diamond file adds real utility without adding bulk.
A scale in your pocket.
Quickly measure small items or verify dimensions with the compact built-in ruler — handy whenever you need a rough size and don't have a tape on you.
Carry it your way.
The pocket clip is removable and repositionable, so you can set it up for deep carry, swap sides, or take it off entirely for keychain duty.
Find it in the dark.
The pocket clip accepts a 1.5 × 6 mm tritium tube, so the E-ONE V2 glows on its own — always-on visibility with zero battery, plus a look that's unmistakably yours.
Tether it down.
A dedicated lanyard hole — independent of the clip — lets you add paracord, a split ring, or a fob for flexible carry and quick attachment.
The numbers behind the build.
Against an ordinary multi-tool.
Don't take our word for it.
Independent, hands-on reviews from the EDC community — see what real reviewers think before you buy.
What EDC fans are saying.
Amazing little tool. Took a while to get here but well worth it.
Smaller than I imagined it to be but perfect as a bit driver with add-ons — the reason I bought it.
A1 very nice tool, durable enough.
Well made, comes with a T6, PH1, and flathead bit. The level reads well. I did have to round the corners a little on the pocket clip and the thin end of the pry so it wouldn't tear up my pants. I wish it was about 3/4" longer and came with a PH2 bit. Overall, I'm very satisfied.
Solid EDC tool with solid build. First one I've seen with a bubble level in a tool this small. Bit storage is nice. The clip is a bit stiff to slide into a pocket, so I may just keep it in a backpack pocket.
This pry bar feels perfect in my hand.
This thing is exactly what you're looking for. Gadget nerds and collectors — this thing is awesome.
I love this thing. Love the compartment that holds a bit of your choosing — I'm carrying a T8 torx bit for my knives. Sweet having the right tool in the woods! Highly recommended. Customer service was outstanding and communication was great. Get after this!
A somewhat compact tool with good functionality.
One bar replaces a drawer of tools.
Grab the E-ONE V2 and carry nine functions in the space of one.
Set up in under a minute.
Load a bit
Drop your most-used 1/4" bit into the magnetic holder; stow a spare in the hidden compartment.
Fit your clip
Position the adjustable pocket clip to your preferred side — or remove it for keychain carry.
Add the glow
Fit a 1.5 × 6 mm tritium tube into the pocket clip (optional) for always-on, no-battery visibility.
Carry on
Pocket, clip, or lanyard it — the E-ONE V2 is ready for whatever the day brings.
Ordered a tritium variant? Inspect on arrival.
Every tritium tube we ship is inspected and sealed. If your order includes a tritium option, here's how to verify it on arrival — and our policy if something isn't right.
Find a completely dark space, such as a closet or bathroom with all lights off.
Open the package and inspect the tritium tube immediately on the delivery date.
Place the item in total darkness and let your eyes adjust for about 30 seconds.
An intact tritium tube should glow on its own and does not require any light charging.
If the tube does not glow or shows any defect, you must contact us by email no later than the end of the day following delivery. Photos of the defective tube must be provided together with the original packaging. Delivery time is determined solely by the carrier's tracking information and delivery confirmation record. Claims reported after this deadline will not be accepted.
We want you fully happy with your tritium glow, so every tube is inspected before shipping. To protect both sides, please inspect the item immediately upon opening the package on the delivery date, checked in a completely dark environment. The delivery date and time are determined by the carrier's tracking information and delivery confirmation record. If anything looks off, just email us by the end of the day following delivery and we'll help. Claims reported after this window can't be accepted.
Frequently asked questions.
What bits does it accept?
Why Grade 5 titanium?
Can I take it on a plane?
What's your return policy?
Meet your new everyday carry.
Compact, capable, and built from titanium to handle years of everyday carry.
